InSilMaxä Extreme High Temperature, Heat, Flame, Fire & Weld and Molten
Metal Splatter Resistant Silica Tape:
ThermaTapeä 2500
High-Temperature
Tapes
This is an extreme high temperature, heat and flame resistant silica tape, and is an excellent alternative to asbestos and ceramic based textiles. This high temperature tape can be used to wrap and protect wires, cables, hoses, pipes and tubes, and also provides energy savings and personnel protection.

     ·  Highly flexible and minimal shrinkage. 
    
·  High abrasion resistance and tensile strength.
    
·  Melts above 3000°F / 1648°C.
    
·  Available with (PSA) pressure sensitive adhesive on one side.
    
·  Produced from an extremely pure silica base fiber (SiO2) and can be
        used at 1800°F / 982°C continuously.
    
ThermaTape
ä  2500 is available in three versions:
Slit Tape:
               
·  Manufactured from roll fabric.
               
·  0.090" thick.
               
·  1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4", 5" and 6" widths.
               
·  Other widths available by request.
               
·  Standard 25 and 50 foot rolls.
Folded & Stitched Tape:
               
·   Manufactured by layering 0.090" tape.
               
·   2 layers for 1/8"; 3 layers for 3/16" and 4 layers for 1/4"
               
·   1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4", 5" and 6" widths.
               
·  Other widths available by request.
               
·  Standard 25 and 50 foot rolls.

Woven Tape:
               
·   Easy to wrap around radius without buckling, edge is salvaged.
               
·   1/8"; 2 layers for 1/4" (stitched)
               
·   1", 1 1/2", 2", 3", & 4" widths.
               
·   Standard 25 and 50 foot rolls.
Materials that resist catching fire, burn slowly, or retard burning can be described as either "incombustible", "non-flammable", "non-combustible", "fire-resistant" or "fire-retardant".  "Self-extinguishing" materials cease burning once the flame or heat source is removed.  "Fireproof" is understood to mean that an object cannot burn, but few materials are truly fireproof. 

Most of our products fall within one or more of the above descriptions: they resist high temperature, flame, fire, molten metal splash and weld splatter very well but may melt with prolonged exposures past their designed maximum continuous operating temperature.  They can also provide OSHA, ANSI-FM & NFPA compliance and personnel protection.

Using our products to retain heat or cold within pipes, hoses, enclosures or equipment helps conserve energy and resources, and reduces operating costs.
AB Technology Group: Keeping Our World Cooler
ä.  All products are non-asbestos and 100% asbestos free